Configuration

SNMP devices are configured in go.d/snmp.conf. Each device is one job. This page covers the options you actually set — credentials, security, multiple devices, and the polling knobs. For the complete, generated option reference and more examples, see the SNMP collector page; for profiles, see SNMP Profile Format.

Edit the file with:

cd /etc/netdata        # or your Netdata config directory
sudo ./edit-config go.d/snmp.conf

The smallest working job

For an SNMPv2c device, a hostname and a community string are enough — Netdata auto-detects the model and applies the matching profiles:

jobs:
  - name: core-switch-1
    hostname: 10.0.0.1
    community: public

name is how the device appears in Netdata, so use something recognizable. Repeat the block per device.

SNMPv3

SNMPv3 replaces the community string with a user and security level. Set the level to match how the device is provisioned:

jobs:
  - name: edge-firewall-1
    hostname: 10.0.2.1
    options:
      version: 3
    user:
      name: netdata-monitor
      level: authPriv          # noAuthNoPriv | authNoPriv | authPriv
      auth_proto: sha256       # md5 | sha | sha224 | sha256 | sha384 | sha512
      auth_key: "[AUTH_PASSPHRASE]"
      priv_proto: aes256       # des | aes | aes192 | aes256 | aes192c | aes256c
      priv_key: "[PRIV_PASSPHRASE]"
      # context_name: ""       # only for multi-context agents

Never commit real passphrases; treat auth_key/priv_key as secrets. If a device uses authNoPriv, omit the priv_* fields; for noAuthNoPriv, omit all of them.

Multiple devices

Each device is its own job, and you can set different options per device — for example, a longer interval for heavy core routers than for access switches:

jobs:
  - name: access-sw-1
    hostname: 10.0.10.11
    community: public
    # default update_every: 10s is fine for simple switches

  - name: core-router-1
    hostname: 10.0.0.254
    community: public
    update_every: 30            # poll heavy devices less often
    options:
      max_repetitions: 10       # smaller bulk walks for a device that struggles

Discover devices automatically

Instead of listing devices one by one, point Netdata at your network ranges and let it find them. Edit go.d/sd/snmp.conf, set disabled: no, and give it the credentials to try and the subnets to scan:

disabled: no
discoverer:
  snmp:
    credentials:
      - name: ro-v2c
        version: "2"
        community: public
    networks:
      - subnet: "10.0.10.0/24"
        credential: ro-v2c       # which credential above to try on this range

Netdata scans each subnet, identifies the SNMP devices, and creates a polling job for each one automatically — recognizing the model and starting collection with no further configuration. It rescans on an interval to pick up new devices. Each subnet is scanned up to /23 (512 IPs); add more subnet entries for larger networks. This is the fastest way to onboard a whole network: set the credentials and ranges once, and every device on them comes up monitored.

The defaults suit most networks. For large or sensitive ones, tune the scan under discoverer.snmp:

Option	Default	What it does
rescan_interval	30m	How often to rescan the networks for new devices. A negative value scans once and stops.
device_cache_ttl	12h	How long a discovered device is trusted before it is re-probed.
parallel_scans_per_network	32	How many IPs are probed at once within each subnet. Lower it to be gentler on the network.
timeout	1s	How long to wait for a probe reply before moving on.

The options that matter

Option	Default	What it does
hostname	(required)	Device IP or DNS name.
community	public	SNMPv1/v2c community string.
options.version	2c	SNMP version: 1, 2c, or 3.
options.port	161	SNMP UDP port.
options.timeout	5	Seconds to wait for a response.
options.retries	1	Retries before a request is counted failed.
options.max_repetitions	25	Rows per GETBULK. Lower it for devices that choke on large responses.
options.max_request_size	20	OIDs per request.
update_every	10	Polling interval (seconds). Raise it for heavy or slow devices.
manual_profiles	(none)	Profiles to apply to a device that reports no sysObjectID (rare). Devices that report one are matched automatically — normally leave this empty.
create_vnode	true	Expose the device as its own virtual node in Netdata.
vnode_device_down_threshold	3	Consecutive failed polls before the device is marked down.

ICMP alongside SNMP

By default Netdata also pings each device, giving you reachability and latency next to the SNMP metrics. SNMP and ping run concurrently — ping never delays polling.

jobs:
  - name: core-router-1
    hostname: 10.0.0.254
    community: public
    ping:
      enabled: true            # default
      privileged: true         # default; uses raw ICMP
      packets: 3
      interval: 100ms
    # ping_only: true          # skip SNMP, collect ICMP only (e.g. a non-SNMP device)

Profiles: auto-detect first, force only when needed

You normally configure nothing for profiles — the collector reads sysObjectID/sysDescr and applies every stock profile whose selector matches the device. To add coverage for a model or collect extra OIDs, drop a custom profile with a matching selector into /etc/netdata/go.d/snmp.profiles/; it loads alongside the stock profiles and applies automatically to every device it matches. A file there with the same name as a stock profile overrides that stock profile — use this to tighten a selector or change what a model collects. The format and the extends composition model are documented in SNMP Profile Format. manual_profiles is only for the rare device that reports no sysObjectID: with nothing to auto-match on, you name the profiles to apply — otherwise leave it empty.

What's next

• Sizing and Scaling — how update_every and max_repetitions set a hub's capacity, and when to add hubs.
• Validation — confirm the device matched a profile and is polling cleanly.
• Troubleshooting — timeouts, missing metrics, and SNMPv3 auth failures.