Netdata Agent Security and Privacy Design

tip

Executive Summary

• Netdata Agent is designed with a security-first approach to protect system data.
• Raw data never leaves the system where Netdata is installed.
• Only processed metrics and minimal metadata are stored, streamed, or archived.
• Communications are secured with TLS, authentication uses API keys and cryptographic validation, and Agent architecture enforces isolation and resilience.
• Netdata Agent follows best practices supporting PCI DSS, HIPAA, GDPR, and CCPA compliance, and is continuously audited and improved for security.

Introduction

Netdata Agent uses a security-first design.
It protects data by exposing only chart metadata and metric values, never raw system or application data.

This design allows Netdata to operate in high-security environments, including PCI Level 1 compliance.

When plugins collect data from databases or logs, only processed metrics are:

• Stored in Netdata databases
• Sent to upstream Netdata servers
• Archived to external time-series databases

Raw data remains local and is never transmitted.

User Data Protection

Netdata Agent safeguards your data at every stage.

Aspect	Protection Mechanism
Raw Data	Stays on your system
Plugins	Hard-coded for collection only, reject external commands
Functions Feature	Predefined plugin functions, UI only calls these
Privileges	Most plugins run without escalated privileges; the main process does not require them

Plugins needing escalated privileges are isolated:

• Perform only predefined collection tasks
• Keep raw data inside the local process
• Never save, transfer, or expose raw data to the Netdata daemon

tip

Netdata's decentralized design keeps all data local.
You are responsible for backing up and managing your system data.

Communication and Data Encryption

Netdata secures all internal and external communications:

Communication	Protection
Plugins to Daemon	Ephemeral in-memory pipes, isolated from other processes
Streaming Metrics	Requires API keys, optional TLS encryption
Web API	Supports TLS if configured
Cloud Connection	MQTT over WebSockets over TLS with public/private key authorization

Public and private keys are exchanged securely during Cloud provisioning.

Netdata Agent Security Flow

Outbound Network Communication

A Netdata Agent initiates outbound network connections only through a small number of well-defined paths. For Cloud communication the Agent is never an inbound server — all Cloud traffic is outbound and initiated by the Agent.

Understanding each path, its default state, and how to disable it is essential when deploying the Agent in restricted or air-gapped networks. The paths below are the only default outbound connections a stock Agent makes.

Summary

Communication Path	Default State	Trigger	Destination	How to Disable
Anonymous telemetry (backend)	On	Agent start, stop, or fatal crash	Netdata telemetry cloud function (GCP) over HTTPS	Create .opt-out-from-anonymous-statistics, set DISABLE_TELEMETRY=1/DO_NOT_TRACK=1, or install with --disable-telemetry
Anonymous telemetry (dashboard)	On	Viewing the local Agent dashboard	PostHog (anonymized page-view events)	Same as above (shared opt-out controls)
Agent-Cloud Link (ACLK)	Off until connected	Connecting a node to a Space	app.netdata.cloud, api.netdata.cloud, mqtt.netdata.cloud (WSS, 443)	Do not connect the Agent to Netdata Cloud
Installer script download	n/a (install time)	Running kickstart.sh	get.netdata.cloud	Pre-download the script for an offline install
Package download / automatic update	On for online installs	Install, or scheduled auto-update	repository.netdata.cloud	--no-updates at install, or disable netdata-updater.sh

Anonymous telemetry

By default, Netdata collects anonymous usage information through two channels:

• Agent backend: On start, clean stop, and fatal crash, the netdata daemon executes the anonymous-statistics.sh script, which sends anonymized system and version information to a Netdata telemetry cloud function hosted in GCP over HTTPS.
• Agent dashboard: When you view the local dashboard (http://NODE:19999), PostHog JavaScript sends anonymized page-view events. Sensitive attributes (such as IP and hostname) are overwritten with constant values before any event is sent.

Telemetry is on by default and carries only anonymized metadata — never raw metrics. See Anonymous telemetry events for exactly what is collected and the opt-out methods.

Agent-Cloud Link (ACLK)

The ACLK is the channel the Agent uses to communicate with Netdata Cloud. It:

• Uses an outgoing secure WebSocket (WSS) connection on port 443.
• Activates only after you connect a node to a Netdata Cloud Space.
• Requires outbound access to app.netdata.cloud, api.netdata.cloud, and mqtt.netdata.cloud.
• Transmits only the metadata needed for coordination and access control — raw metrics never leave your infrastructure.

IP addresses can change without notice and vary based on your geographic location due to CDN-edge servers, so always prefer domain-based allowlisting. For the complete firewall allowlist with ports, see Configure Netdata for cybersecurity platforms. If your Agent requires a proxy to reach the internet, see proxy configuration.

ACLK is off until you connect the Agent. An unconnected Agent never opens this connection.

Installation and updates

These connections occur at install or update time, not as continuous Agent runtime traffic:

• The kickstart.sh installer script is downloaded from get.netdata.cloud.
• Packages are fetched from repository.netdata.cloud/repos/stable (stable channel) or repository.netdata.cloud/repos/edge (nightly channel).
• Automatic updates are enabled by default for online installations (they are disabled automatically for offline installations). When enabled, the separate netdata-updater.sh script runs on a schedule (systemd timer, cron, or interval) and connects to the package repository to check for and install newer versions.

Disable automatic updates with the --no-updates flag at install time, or by disabling the updater on an existing install. For a fully disconnected deployment, see Install Netdata on Offline Systems.

Fully autonomous operation

When all three of the following are true, the running Agent daemon makes no outbound internet connections and operates fully autonomously:

1. The Agent is not connected to Netdata Cloud (ACLK stays inactive).
2. Anonymous telemetry is disabled.
3. Automatic updates are disabled (or the host has no route to the package repository).

In this state the Agent continues to collect, store, and serve metrics locally. User-configured collectors (for example, an HTTP-based collector pointed at an external endpoint) may open their own outbound connections — those are driven by your configuration, not by default Agent behavior.

tip

For air-gapped or strictly firewalled environments, the recommended baseline is: disable telemetry, do not connect the Agent to Netdata Cloud, and disable automatic updates. With those three in place the Agent runs with no outbound internet dependencies. See Install Netdata on Offline Systems for a fully disconnected installation procedure.

Authentication

Netdata supports multiple authentication methods depending on the connection type:

Connection	Authentication Method
Direct Agent Access	Typically unauthenticated, relies on LAN isolation or firewall policies
Streaming Between Agents	Requires API key authentication, optional TLS
Agent-to-Cloud	Public/private key cryptography with mandatory TLS

tip

For additional access control, place Netdata Agents behind an authenticating web proxy.

Security Vulnerability Response

Netdata follows a structured vulnerability response process:

• Acknowledges reports within three business days
• Initiates a Security Release Process for verified issues
• Releases patches promptly
• Handles vulnerability information confidentially
• Keeps reporters updated throughout the process

tip

Learn more in Netdata's GitHub Security Policy.

Protection Against Common Security Threats

Netdata Agent is resilient against major security threats:

Threat	Defense Mechanism
DDoS Attacks	Fixed thread counts, automatic memory management, resource prioritization
SQL Injections	No UI data passed back to database-accessing plugins
System Resource Starvation	Nice priority protects production apps, early termination in OS-OOM events

Additional protections include:

• Running as an unprivileged user by default
• Isolating escalated privileges to specific collectors
• Proactive CPU and memory management

User-Customizable Security Settings

You can tailor the Agent's security settings:

Setting	Options Available
TLS Encryption	Configurable for web API and streaming
Access Control Lists (ACLs)	Limit endpoint access by IP address
CPU/Memory Priority	Adjust scheduling priority and memory thresholds

tip

Use Netdata configuration files to apply custom security settings.